View UPD16707P_1332184.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
MOS INTEGRATED CIRCUIT
PD16707
263/256-OUTPUT TFT-LCD GATE DRIVER
DESCRIPTION
The PD16707 is a TFT-LCD gate driver equipped with 263/256-output lines. It can output a high-gate scanning voltage in response to CMOS level input because it provided with a level-shift circuit inside the IC circuit. It can also drive the XGA / SXGA / SXGA+, and since the input signal is placed symmetrically, this product can wire easily between gate drivers.
FEATURES
* CMOS level input (2.3 to 3.6V) * 263/256 outputs * High-output voltage (VDD2 to VEE : 40 V MAX.) * Capable of All-ON outputting (/AOR, /AOL) * Input terminal symmetrical placement * Adapted to COG and TCP Remark /xxx indicates active low signal.
ORDERING INFORMATION
Part Number Package CHIP TCP (TAB package)
PD16707P PD16707N-xxx
Remark Purchasing the above chip entail the exchange of documents such as a separate memorandum or product quality, so please contact one of our sales representavies. The TCP's external shape is customized. To order the required shape, so please contact one of our sales representatives.
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information.
Document No. S16411EJ1V0DS00 (1st edition) Date Published January 2003 NS CP (K) Printed in Japan
2003
PD16707
1. BLOCK DIAGRAM
R,/LR R,/LL MODE CLKR CLKL STVR
SR1 SR2 SR3
263-bit shift register
SR261 SR262 SR263
STVL
OER OEL /AOR /AOL PASSR PASSL
LS2Note
LS2Note
LS2Note
LS2Note
LS2Note
LS2Note
VEE
VEE level VEE level
O0
O1
O2
O3
O261 O262
O263 O264
Note LS2 : shifts CMOS level and output level (VDD2 to VEE).
2
Data Sheet S16411EJ1V0DS
PD16707
2. PIN CONFIGURATION 2.1 CHIP PAKAGE : PD16707P Chip surface (Bump side)
Chip size : 1.060.02 x 16.010.02 [mm] Chip thickness : 59525 [m]
619pin 620pin DUMMY 618pin
PASSR CLKR /AOR R,/LR
VDD1
605pin 603pin DUMMY 604pin
STVR VSS VSS
Alignment Mark1 : 50 x 50 m coordinate : (267.5, -7785) (267.5, 7785)
Alignment Mark2 : 50 x 50 m
1pin 602pin
DUMMY OER OER DUMMY VEE VEE VEE VEE DUMMY VDD2 VDD2 VDD2 VDD2 DUMMY
DUMMY VDD1 VDD1 DUMMY VEE VEE VEE DUMMY VDD2 VDD2 DUMMY Y(+) O0 O1 O2 X(+) O262 O263 O264 DUMMY VDD2 VDD2 DUMMY VEE VEE VEE DUMMY VDD1 VDD1 DUMMY
coordinate : (387.5, -7785) (387.5, 7785)
(0,0) DUMMY VDD2 VDD2 VDD2 VDD2 DUMMY VEE VEE VEE VEE DUMMY OEL OEL
292pin
DUMMY
311pin
PASSL
/AOL
VSS
CLKL
R,/LL
STVL
MODE
VSS
294pin DUMMY 293pin 295pin
308pin DUMMY 310pin
Visual direction
Bump
IC
309pin
Data Sheet S16411EJ1V0DS
3
PD16707
Table 2-1 Pad Coordinate Bump size (1/7)
(X:Y) [ m] Bump size (X:Y) [ m] Bump size
PAD No.
PAD Name
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
DUMMY OER OER DUMMY VEE VEE VEE VEE DUMMY VDD2 VDD2 VDD2 VDD2 DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY
X -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0
Y 7303.0 7225.0 7175.0 7125.0 7075.0 7025.0 6975.0 6925.0 6875.0 6825.0 6775.0 6725.0 6675.0 6625.0 6575.0 6525.0 6475.0 6425.0 6375.0 6325.0 6275.0 6225.0 6175.0 6125.0 6075.0 6025.0 5975.0 5925.0 5875.0 5825.0 5775.0 5725.0 5675.0 5625.0 5575.0 5525.0 5475.0 5425.0 5375.0 5325.0 5275.0 5225.0 5175.0 5125.0 5075.0 5025.0 4975.0 4925.0 4875.0 4825.0
PAD No.
PAD Name
50:87 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY
X -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0
Y 4775.0 4725.0 4675.0 4625.0 4575.0 4525.0 4475.0 4425.0 4375.0 4325.0 4275.0 4225.0 4175.0 4125.0 4075.0 4025.0 3975.0 3925.0 3875.0 3825.0 3775.0 3725.0 3675.0 3625.0 3575.0 3525.0 3475.0 3425.0 3375.0 3325.0 3275.0 3225.0 3175.0 3125.0 3075.0 3025.0 2975.0 2925.0 2875.0 2825.0 2775.0 2725.0 2675.0 2625.0 2575.0 2525.0 2475.0 2425.0 2375.0 2325.0
83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33
4
Data Sheet S16411EJ1V0DS
PD16707
Table 2-1 Pad Coordinate Bump size (2/7)
(X:Y) [ m] Bump size (X:Y) [ m]
PAD No. PAD Name
PAD No.
PAD Name
101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150
DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY
X -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0
Y 2275.0 2225.0 2175.0 2125.0 2075.0 2025.0 1975.0 1925.0 1875.0 1825.0 1775.0 1725.0 1675.0 1625.0 1575.0 1525.0 1475.0 1425.0 1375.0 1325.0 1275.0 1225.0 1175.0 1125.0 1075.0 1025.0 975.0 925.0 875.0 825.0 775.0 725.0 675.0 625.0 575.0 525.0 475.0 425.0 375.0 325.0 275.0 225.0 175.0 125.0 75.0 25.0 -25.0 -75.0 -125.0 -175.0
83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33
151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200
DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY
X -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0
Y Bump size -225.0 83:33 -275.0 83:33 -325.0 83:33 -375.0 83:33 -425.0 83:33 -475.0 83:33 -525.0 83:33 -575.0 83:33 -625.0 83:33 -675.0 83:33 -725.0 83:33 -775.0 83:33 -825.0 83:33 -875.0 83:33 -925.0 83:33 -975.0 83:33 -1025.0 83:33 -1075.0 83:33 -1125.0 83:33 -1175.0 83:33 -1225.0 83:33 -1275.0 83:33 -1325.0 83:33 -1375.0 83:33 -1425.0 83:33 -1475.0 83:33 -1525.0 83:33 -1575.0 83:33 -1625.0 83:33 -1675.0 83:33 -1725.0 83:33 -1775.0 83:33 -1825.0 83:33 -1875.0 83:33 -1925.0 83:33 -1975.0 83:33 -2025.0 83:33 -2075.0 83:33 -2125.0 83:33 -2175.0 83:33 -2225.0 83:33 -2275.0 83:33 -2325.0 83:33 -2375.0 83:33 -2425.0 83:33 -2475.0 83:33 -2525.0 83:33 -2575.0 83:33 -2625.0 83:33 -2675.0 83:33
Data Sheet S16411EJ1V0DS
5
PD16707
Table 2-1 Pad Coordinate Bump size (3/7)
(X:Y) [ m]
PAD No. PAD Name
(X:Y) [ m]
PAD No. PAD Name
201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250
DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY
X -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0
Y Bump size -2725.0 83:33 -2775.0 83:33 -2825.0 83:33 -2875.0 83:33 -2925.0 83:33 -2975.0 83:33 -3025.0 83:33 -3075.0 83:33 -3125.0 83:33 -3175.0 83:33 -3225.0 83:33 -3275.0 83:33 -3325.0 83:33 -3375.0 83:33 -3425.0 83:33 -3475.0 83:33 -3525.0 83:33 -3575.0 83:33 -3625.0 83:33 -3675.0 83:33 -3725.0 83:33 -3775.0 83:33 -3825.0 83:33 -3875.0 83:33 -3925.0 83:33 -3975.0 83:33 -4025.0 83:33 -4075.0 83:33 -4125.0 83:33 -4175.0 83:33 -4225.0 83:33 -4275.0 83:33 -4325.0 83:33 -4375.0 83:33 -4425.0 83:33 -4475.0 83:33 -4525.0 83:33 -4575.0 83:33 -4625.0 83:33 -4675.0 83:33 -4725.0 83:33 -4775.0 83:33 -4825.0 83:33 -4875.0 83:33 -4925.0 83:33 -4975.0 83:33 -5025.0 83:33 -5075.0 83:33 -5125.0 83:33 -5175.0 83:33
251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300
DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY DUMMY VDD2 VDD2 VDD2 VDD2 DUMMY VEE VEE VEE VEE DUMMY OEL OEL DUMMY DUMMY /AOL /AOL R,/LL R,/LL VSS VSS CLKL
X -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -404.0 -320.0 -242.0 -242.0 -187.0 -187.0 -132.0 -132.0 -77.0
Y Bump size -5225.0 83:33 -5275.0 83:33 -5325.0 83:33 -5375.0 83:33 -5425.0 83:33 -5475.0 83:33 -5525.0 83:33 -5575.0 83:33 -5625.0 83:33 -5675.0 83:33 -5725.0 83:33 -5775.0 83:33 -5825.0 83:33 -5875.0 83:33 -5925.0 83:33 -5975.0 83:33 -6025.0 83:33 -6075.0 83:33 -6125.0 83:33 -6175.0 83:33 -6225.0 83:33 -6275.0 83:33 -6325.0 83:33 -6375.0 83:33 -6425.0 83:33 -6475.0 83:33 -6525.0 83:33 -6575.0 83:33 -6625.0 83:33 -6675.0 83:33 -6725.0 83:33 -6775.0 83:33 -6825.0 83:33 -6875.0 83:33 -6925.0 83:33 -6975.0 83:33 -7025.0 83:33 -7075.0 83:33 -7125.0 83:33 -7175.0 83:33 -7225.0 83:33 -7303.0 50:87 -7879.0 87:50 -7778.0 33:83 -7879.0 33:83 -7778.0 33:83 -7879.0 33:83 -7778.0 33:83 -7879.0 33:83 -7778.0 33:83
6
Data Sheet S16411EJ1V0DS
PD16707
Table 2-1 Pad Coordinate Bump size (4/7)
(X:Y) [ m]
PAD No. PAD Name
(X:Y) [ m]
PAD No. PAD Name
301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350
CLKL PASSL PASSL STVL STVL VSS VSS MODE MODE DUMMY DUMMY VDD1 VDD1 DUMMY VEE VEE VEE DUMMY VDD2 VDD2 DUMMY O264 O263 O262 O261 O260 O259 O258 O257 O256 O255 O254 O253 O252 O251 O250 O249 O248 O247 O246 O245 O244 O243 O242 O241 O240 O239 O238 O237 O236
X -77.0 -22.0 -22.0 33.0 33.0 88.0 88.0 143.0 143.0 221.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0
Y Bump size -7879.0 33:83 -7778.0 33:83 -7879.0 33:83 -7778.0 33:83 -7879.0 33:83 -7778.0 33:83 -7879.0 33:83 -7778.0 33:83 -7879.0 33:83 -7879.0 87:50 -7303.0 50:87 -7225.0 83:33 -7175.0 83:33 -7125.0 83:33 -7075.0 83:33 -7025.0 83:33 -6975.0 83:33 -6925.0 83:33 -6875.0 83:33 -6825.0 83:33 -6775.0 83:33 -6725.0 83:33 -6675.0 83:33 -6625.0 83:33 -6575.0 83:33 -6525.0 83:33 -6475.0 83:33 -6425.0 83:33 -6375.0 83:33 -6325.0 83:33 -6275.0 83:33 -6225.0 83:33 -6175.0 83:33 -6125.0 83:33 -6075.0 83:33 -6025.0 83:33 -5975.0 83:33 -5925.0 83:33 -5875.0 83:33 -5825.0 83:33 -5775.0 83:33 -5725.0 83:33 -5675.0 83:33 -5625.0 83:33 -5575.0 83:33 -5525.0 83:33 -5475.0 83:33 -5425.0 83:33 -5375.0 83:33 -5325.0 83:33
351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400
O235 O234 O233 O232 O231 O230 O229 O228 O227 O226 O225 O224 O223 O222 O221 O220 O219 O218 O217 O216 O215 O214 O213 O212 O211 O210 O209 O208 O207 O206 O205 O204 O203 O202 O201 O200 O199 O198 O197 O196 O195 O194 O193 O192 O191 O190 O189 O188 O187 O186
X 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0
Y Bump size -5275.0 83:33 -5225.0 83:33 -5175.0 83:33 -5125.0 83:33 -5075.0 83:33 -5025.0 83:33 -4975.0 83:33 -4925.0 83:33 -4875.0 83:33 -4825.0 83:33 -4775.0 83:33 -4725.0 83:33 -4675.0 83:33 -4625.0 83:33 -4575.0 83:33 -4525.0 83:33 -4475.0 83:33 -4425.0 83:33 -4375.0 83:33 -4325.0 83:33 -4275.0 83:33 -4225.0 83:33 -4175.0 83:33 -4125.0 83:33 -4075.0 83:33 -4025.0 83:33 -3975.0 83:33 -3925.0 83:33 -3875.0 83:33 -3825.0 83:33 -3775.0 83:33 -3725.0 83:33 -3675.0 83:33 -3625.0 83:33 -3575.0 83:33 -3525.0 83:33 -3475.0 83:33 -3425.0 83:33 -3375.0 83:33 -3325.0 83:33 -3275.0 83:33 -3225.0 83:33 -3175.0 83:33 -3125.0 83:33 -3075.0 83:33 -3025.0 83:33 -2975.0 83:33 -2925.0 83:33 -2875.0 83:33 -2825.0 83:33
Data Sheet S16411EJ1V0DS
7
PD16707
Table 2-1 Pad Coordinate Bump size (5/7)
(X:Y) [ m]
PAD No. PAD Name
401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450
O185 O184 O183 O182 O181 O180 O179 O178 O177 O176 O175 O174 O173 O172 O171 O170 O169 O168 O167 O166 O165 O164 O163 O162 O161 O160 O159 O158 O157 O156 O155 O154 O153 O152 O151 O150 O149 O148 O147 O146 O145 O144 O143 O142 O141 O140 O139 O138 O137 O136
X 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0
Y Bump size -2775.0 83:33 -2725.0 83:33 -2675.0 83:33 -2625.0 83:33 -2575.0 83:33 -2525.0 83:33 -2475.0 83:33 -2425.0 83:33 -2375.0 83:33 -2325.0 83:33 -2275.0 83:33 -2225.0 83:33 -2175.0 83:33 -2125.0 83:33 -2075.0 83:33 -2025.0 83:33 -1975.0 83:33 -1925.0 83:33 -1875.0 83:33 -1825.0 83:33 -1775.0 83:33 -1725.0 83:33 -1675.0 83:33 -1625.0 83:33 -1575.0 83:33 -1525.0 83:33 -1475.0 83:33 -1425.0 83:33 -1375.0 83:33 -1325.0 83:33 -1275.0 83:33 -1225.0 83:33 -1175.0 83:33 -1125.0 83:33 -1075.0 83:33 -1025.0 83:33 -975.0 83:33 -925.0 83:33 -875.0 83:33 -825.0 83:33 -775.0 83:33 -725.0 83:33 -675.0 83:33 -625.0 83:33 -575.0 83:33 -525.0 83:33 -475.0 83:33 -425.0 83:33 -375.0 83:33 -325.0 83:33
PAD No.
PAD Name
451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500
O135 O134 O133 O132 DUMMY DUMMY DUMMY DUMMY DUMMY O131 O130 O129 O128 O127 O126 O125 O124 O123 O122 O121 O120 O119 O118 O117 O116 O115 O114 O113 O112 O111 O110 O109 O108 O107 O106 O105 O104 O103 O102 O101 O100 O99 O98 O97 O96 O95 O94 O93 O92 O91
X 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0
Y -275.0 -225.0 -175.0 -125.0 -75.0 -25.0 25.0 75.0 125.0 175.0 225.0 275.0 325.0 375.0 425.0 475.0 525.0 575.0 625.0 675.0 725.0 775.0 825.0 875.0 925.0 975.0 1025.0 1075.0 1125.0 1175.0 1225.0 1275.0 1325.0 1375.0 1425.0 1475.0 1525.0 1575.0 1625.0 1675.0 1725.0 1775.0 1825.0 1875.0 1925.0 1975.0 2025.0 2075.0 2125.0 2175.0
(X:Y) [ m] Bump size
83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33
8
Data Sheet S16411EJ1V0DS
PD16707
Table 2-1 Pad Coordinate Bump size (6/7)
(X:Y) [ m] Bump size (X:Y) [ m] Bump size
PAD No.
PAD Name
501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550
O90 O89 O88 O87 O86 O85 O84 O83 O82 O81 O80 O79 O78 O77 O76 O75 O74 O73 O72 O71 O70 O69 O68 O67 O66 O65 O64 O63 O62 O61 O60 O59 O58 O57 O56 O55 O54 O53 O52 O51 O50 O49 O48 O47 O46 O45 O44 O43 O42 O41
X 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0
Y 2225.0 2275.0 2325.0 2375.0 2425.0 2475.0 2525.0 2575.0 2625.0 2675.0 2725.0 2775.0 2825.0 2875.0 2925.0 2975.0 3025.0 3075.0 3125.0 3175.0 3225.0 3275.0 3325.0 3375.0 3425.0 3475.0 3525.0 3575.0 3625.0 3675.0 3725.0 3775.0 3825.0 3875.0 3925.0 3975.0 4025.0 4075.0 4125.0 4175.0 4225.0 4275.0 4325.0 4375.0 4425.0 4475.0 4525.0 4575.0 4625.0 4675.0
PAD No.
PAD Name
83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33
551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600
O40 O39 O38 O37 O36 O35 O34 O33 O32 O31 O30 O29 O28 O27 O26 O25 O24 O23 O22 O21 O20 O19 O18 O17 O16 O15 O14 O13 O12 O11 O10 O9 O8 O7 O6 O5 O4 O3 O2 O1 O0 DUMMY VDD2 VDD2 DUMMY VEE VEE VEE DUMMY VDD1
X 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0 312.0
Y 4725.0 4775.0 4825.0 4875.0 4925.0 4975.0 5025.0 5075.0 5125.0 5175.0 5225.0 5275.0 5325.0 5375.0 5425.0 5475.0 5525.0 5575.0 5625.0 5675.0 5725.0 5775.0 5825.0 5875.0 5925.0 5975.0 6025.0 6075.0 6125.0 6175.0 6225.0 6275.0 6325.0 6375.0 6425.0 6475.0 6525.0 6575.0 6625.0 6675.0 6725.0 6775.0 6825.0 6875.0 6925.0 6975.0 7025.0 7075.0 7125.0 7175.0
83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33 83:33
Data Sheet S16411EJ1V0DS
9
PD16707
Table 2-1 Pad Coordinate Bump size (7/7)
(X:Y) [ m] Bump size
PAD No.
PAD Name
601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620
VDD1 DUMMY DUMMY VSS VSS STVR STVR PASSR PASSR CLKR CLKR VSS VSS R,/LR R,/LR VDD1 VDD1 /AOR /AOR DUMMY
X 312.0 312.0 221.0 143.0 143.0 88.0 88.0 33.0 33.0 -22.0 -22.0 -77.0 -77.0 -132.0 -132.0 -187.0 -187.0 -242.0 -242.0 -320.0
Y 7225.0 7303.0 7879.0 7778.0 7879.0 7778.0 7879.0 7778.0 7879.0 7778.0 7879.0 7778.0 7879.0 7778.0 7879.0 7778.0 7879.0 7778.0 7879.0 7879.0
83:33 50:87 87:50 33:83 33:83 33:83 33:83 33:83 33:83 33:83 33:83 33:83 33:83 33:83 33:83 33:83 33:83 33:83 33:83 87:50
Bump Specs (Standard reference value)
Parameter Bump size tolerance Bump height (design center value) Bump height tolerance (within lot) Bump height tolerance (within chip) Bump hardness
Specifications 5 m 15 m 4 m Range : 3 m 50 20 Hv
10
Data Sheet S16411EJ1V0DS
PD16707
2.2 PIN CONFIGURATION : PD16707N-xxx (Copper foil surface, face-up)
VDD2 VEE OER /AOR VDD1 R,/LR VSS CLKR PASSR STVR VSS VDD1 VEE VDD2 O0 O1 O2
Copper Foil Surface
Copper (wiring)
Visual direction
Base film
IC
O261 O262 O263 O264 VDD2 VEE VDD1 MODE VSS STVL PASSL CLKL VSS R,/LL /AOL OEL VEE VDD2
Remark This figure does not specify the TCP package.
Data Sheet S16411EJ1V0DS
11
PD16707
3. PIN FUNCTIONS
Pin Symbol O1 to O263 Pin Name Driver output I/O Description
O0, O264 R,/LR, R,/LL
Driver output Shift direction control
Output These pins output scan signals that drive the vertical direction (gate lines) of a TFTLCD. The output signals change in synchronization with the rising edge of shift clock CLK. The driver output amplitude is VDD2 to VEE. Output The signal of VEE level is outputted by fixation. Input The shift direction control pin of shift register. The shift directions of shift register are as follows. R,/LR, R,/LL = H : right shift : STVR O1 O263 STVL R,/LR, R,/LL = L : left shift : STVL O263 O1 STVR R,/LR and R,/LL are connected inside IC. This is the I/O of the internal shift register. The start pulse is read at the rising edge of shift clock CLK (CLKR,CLKL), and scan signals are output from the driver output pins. The input level is a VDD1 to VSS (logic level). When in MODE = H, the start pulse is output at the falling edge of the 263rd clock of shift clock CLK, and is cleared at the falling edge of the 264th clock. The output level is VDD1 to VSS (logic level). This pin inputs a shift clock to the internal shift register. The shift operation is performed in synchronization with the rising edge of this input. CLKR and CLKL are connected inside IC. When this pin goes high level, the driver output is fixed to VEE level. The shift register is not cleared. CLK is asynchronous in the clock. OER and OEL are connected inside IC. When this pin goes low level, all driver output = VDD2 level. The shift register is not cleared. This pin has priority over OER,OEL. This pin is pulled up to VDD1 power supply inside IC. CLK is asynchronous in the clock. /AOR and /AOL are connected inside IC. MODE = V DD1 or open: 263 outputs MODE = VSS: 256 outputs (Driver pins O129 to O135 are invalid.) Input level is VDD1 to VSS (logic level) This pin is pulled up to VDD1 power supply inside IC. PASSR and PASSL are connected inside IC. 2.3 to 3.6 V 15 to 25 V. The driver output: high level Connect this pin to the ground of the system. -15 to -5 V. The driver output: low level
STVR, STVL
Start pulse input/output
I/O
CLKR, CLKL OER,OEL
Shift clock input
Input
Output enable input
Input
/AOR, /AOL All-on control
Input
MODE
Selection of Number of outputs
Input
PASSR, PASSL VDD1 VDD2 VSS VEE
Pass line Logic power supply Driver positive power supply Logic ground Negative Power supply for internal operation Dummy
Input - - - -
DUMMY Note
-
No dummy pins are connected with other pins inside IC.
Note DUMMY pins are adapted only for chip product. (There is no DUMMY pin in TCP product.) Cautions 1. To prevent latch-up, turn on power to VDD1 logic input VEE VDD2 in this order. Turn off power in the reverse order. These power up/down sequence must be observed also during transition period. 2. Insert a capacitor of about 0.1 F between each power line, as shown below, to secure noise margin such as VIH and VIL.
VDD2 VDD1 0.1 F VSS 0.1 F VEE 0.1 F
12
Data Sheet S16411EJ1V0DS
PD16707
4. RELATIONS OF ENABLE INPUT AND OUTPUT TERMINAL
Switching is possible for 263/256 with PD16707 by the MODE pin.
MODE = H or open 263 out Mode O1 O2 O3 O4 O5 O6 O127 O128 O129 O130 O131 O132 O133 O134 O135 O136 O137 O259 O260 O261 O262 O263
MODE = L 256 out Mode O1 O2 O3 O4 O5 O6 O127 O128 VOUT = VEE VOUT = VEE VOUT = VEE VOUT = VEE VOUT = VEE VOUT = VEE VOUT = VEE O136 O137 O259 O260 O261 O262 O263
Data Sheet S16411EJ1V0DS
13
PD16707
5. TIMING CHART (R,/LR = R,/LL = H, MODE = H, /AOR = /AOL = H)
1 2 3 262 263 264 265 266
CLKR CLKL
OER OEL
STVR (STVL)
O1 (O263)
O2 (O262)
O3 (O261)
O262 (O2)
O263 (O1)
STVL (STVR)
O1 of next stage (O263 of next stage)
O2 of next stage (O262 of next stage)
Remark The signal name in parenthesis is it at the time of R,/LR = R,/LL = L.
14
Data Sheet S16411EJ1V0DS
PD16707
6. ELECTRICAL SPECIFICATIONS
Absolute Maximum Ratings (TA = 25C, VSS = 0 V)
Parameter Logic Supply Voltage Driver Positive Supply Voltage Power Supply Voltage Internal Operation Negative Supply Voltage Input Voltage Operating Ambient Temperature Storage Temperature VDD1 VDD2 VDD2-VEE VEE VI TA Tstg Symbol Rating -0.5 to +7.0 -0.5 to +28 -0.5 to +42 -16 to + 0.5 -0.5 to VDD1 + 0.5 -20 to +75 -55 to +125 Unit V V V V V C C
Caution
Product qualify may suffer if the absolute maximum rating is exceeded even momentarily for any parameter. That is, the absolute maximum ratings are rated values at which the product is on the verge of suffering physical damage, and therefore the product must be used under conditions that ensure that the absolute maximum ratings are not exceeded.
Recommended Operating Range (TA = -20 to +75C, VSS = 0 V)
Parameter Logic Supply Voltage Driver Positive Supply Voltage Internal Operation Negative Supply Voltage Power Supply Voltage Clock Frequency VDD1 VDD2 VEE VDD2-VEE fCLK Symbol MIN. 2.3 15 -15 20 TYP. 3.0 23 -10 33 MAX. 3.6 25 -5.0 40 500 Unit V V V V kHz
Data Sheet S16411EJ1V0DS
15
PD16707
Electrical Characteristics (TA = -20 to +75C, VDD1 = 2.3V to 3.6V, VDD2 = 23 V, VEE = -10 V, VSS = 0 V)
Parameter High level Input Voltage Low level Input Voltage High level Output Voltage Low level Output Voltage LCD Driver Output ON Resistance Symbol VIH VIL VOH VOL RON Condition CLKR, CLKL, STVR, STVL, R,/LR, R,/LL, OER, OEL, MODE STVR (STVL), IOH = -40 A STVR (STVL), IOL = +40 A VOUT = VEE + 1.0 V or VDD2 - 1.0 V Pull-up Resistance RPU VDD1 = 3.0 V, /AOR, /AOL, MODE Input Leak Current IIL VI = 0 V or 3.6 V, except for /AOR, /AOL, MODE Static Current Dissipation IDD1 VDD1, fCLK = 50 kHz, OER = OEL = L, fSTV = 60 Hz, no load IDD2 VDD2, fCLK = 50 kHz, OER = OEL = L, fSTV = 60 Hz, no load IEE VEE, fCLK = 50 kHz, OER = OEL = L, fSTV = 60 Hz, no load -300 -30 10 100 20 200 1.0 10 50 100 k VDD1 - 0.4 VSS 0.3 VDD1 VSS + 0.4 1.0 V V k MIN. 0.8 VDD1 VSS TYP.Note MAX. VDD1 0.2 VDD1 Unit V V
A A
A
A
Remark STV : STVR (STVL) Note The TYP.value refers to the measured values in VDD1 = 3.0 V, TA = 25C.
16
Data Sheet S16411EJ1V0DS
PD16707
Switching Characteristics (TA = -20 to +75C, VDD1 = 2.3V to 3.6V, VDD2 = 23 V, VEE = -10 V, VSS = 0 V)
Parameter Cascade Output Delay Time Symbol tPHL1 tPLH1 Driver Output Delay Time tPHL2 tPLH2 tPHL3 tPLH3 Output Rise Time Output Fall Time Input Capacitance tTLH tTHL CI TA = 25C CL = 55 pF, CLKR (CLKL) STVL (STVR) CL = 300 pF, CLKR (CLKL) On CL = 300 pF, OER (OEL) On CL = 300 pF Condition MIN. TYP. MAX. 500 500 500 500 500 500 800 800 50 Unit ns ns ns ns ns ns ns ns pF
Timing Requirements (TA = -20 to +75C, VDD1 = 2.3 to 3.6 V, VDD2 = 23 V, VEE = -10 V, VSS = 0 V)
Parameter Clock Pulse High Width Clock Pulse Low Width Enable Pulse Width Data Setup Time Data Hold Time Symbol PWCLK(H) PWCLK(L) PWOE tSETUP tHOLD STVR (STVL) CLKR, CLKL CLKR, CLKL STVR (STVL) Condition MIN. 500 500 1000 200 200 TYP. MAX. Unit ns ns ns ns ns
Remark Unless otherwise specified, the input level is defined to be VIH = VIL = 0.5 VDD1. Caution Keep the time and fall time of the logic input to tr = tf = 20 ns (10 to 90% of the rated values).
Data Sheet S16411EJ1V0DS
17
PD16707
SWITCHING CHARACTERISTICS WAVEFORM (R,/LR = R,/LL = H, MODE = H) Unless otherwise specified, the input level is defined to be VIH = VIL = 0.5 VDD1.
tf
tr
90%
10%
PWOE
tPHL3
tPLH3
tPLH1
tPHL1
50%
4
5
6
7
260
261
262
263
PWCLK(L)
3
PWCLK(H)
tPHL2
2
90%
90%
tSETUP tHOLD
tPLH2
50%
50%
10%
1
10% tTLH
tTHL
STVR
STVL
O1
O262
50%
50%
18
Data Sheet S16411EJ1V0DS
O1-O263
CLKR CLKL
OER OEL
O263
O2
* * *
90%
10%
PD16707
7. RECOMMENDED MOUNTING CONDITIONS
The PD16707 should be soldered and mounted under the following recommended conditions. For details of the recommended soldering conditions, refer to the document Semiconductor Device Mounting Technology Manual (C10535E). For soldering methods and conditions other than those recommended below, contact an NEC sales representative. Recommended Soldering Conditions for Surface Mounting Soldering Conditions.
PD16707N-xxx: TCP (TAB Package)
Mounting Condition Thermocompression Mounting Method Soldering Condition Heating tool 300 to 350C, heating for 2 to 3 seconds : pressure 100g (per solder) ACF (Adhesive Conductive Film) Temporary bonding 70 to 100C: pressure 3 to 8 kg/cm2: time 3 to 5 sec. Real bonding 165 to 180C: pressure 25 to 45 kg/cm2: time 30 to 40 sec. (When using the anisotropy conductive film SUMIZAC1003 of Sumitomo Bakelite,Ltd).
Caution
To find out the detailed conditions for mounting the ACF part, please contact the ACF manufacturing company. Be sure to avoid using two or more mounting methods at a time.
Data Sheet S16411EJ1V0DS
19
PD16707
NOTES FOR CMOS DEVICES
1 PRECAUTION AGAINST ESD FOR SEMICONDUCTORS Note: Strong electric field, when exposed to a MOS device, can cause destruction of the gate oxide and ultimately degrade the device operation. Steps must be taken to stop generation of static electricity as much as possible, and quickly dissipate it once, when it has occurred. Environmental control must be adequate. When it is dry, humidifier should be used. It is recommended to avoid using insulators that easily build static electricity. Semiconductor devices must be stored and transported in an anti-static container, static shielding bag or conductive material. All test and measurement tools including work bench and floor should be grounded. The operator should be grounded using wrist strap. Semiconductor devices must not be touched with bare hands. Similar precautions need to be taken for PW boards with semiconductor devices on it. 2 HANDLING OF UNUSED INPUT PINS FOR CMOS Note: No connection for CMOS device inputs can be cause of malfunction. If no connection is provided to the input pins, it is possible that an internal input level may be generated due to noise, etc., hence causing malfunction. CMOS devices behave differently than Bipolar or NMOS devices. Input levels of CMOS devices must be fixed high or low by using a pull-up or pull-down circuitry. Each unused pin should be connected to VDD or GND with a resistor, if it is considered to have a possibility of being an output pin. All handling related to the unused pins must be judged device by device and related specifications governing the devices. 3 STATUS BEFORE INITIALIZATION OF MOS DEVICES Note: Power-on does not necessarily define initial status of MOS device. Production process of MOS does not define the initial operation status of the device. Immediately after the power source is turned ON, the devices with reset function have not yet been initialized. Hence, power-on does not guarantee out-pin levels, I/O settings or contents of registers. Device is not initialized until the reset signal is received. Reset operation must be executed immediately after power-on for devices having reset function.
20
Data Sheet S16411EJ1V0DS
PD16707
Reference Documents NEC Semiconductor Device Reliability/Quality Control System (C10983E) Quality Grades On NEC Semiconductor Devices (C11531E)
* The information in this document is current as of January, 2003. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above).
M8E 02. 11-1

▲Up To Search▲

Price & Availability of UPD16707P

	To Download UPD16707P Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .